HVAC Rated
    Menu

      18,000 BTU mini-split heat pump · NV-Series

      Trane / Mitsubishi Electric NTXMPH20A122C

      Below average cooling efficiency and average heating efficiency for a 18,000 BTU mini-split heat pump, and certified for cold climates.

      Ranks #462 of 465 18,000 BTU mini-splits for cooling efficiency, and costs about $584 a year to run in a mixed climate like Atlanta.

      SEER2
      17.0 Cooling efficiency over a season
      Below average · beats 2%
      HSPF2
      10.0 Heating efficiency over a season
      Average · beats 43%
      EER2
      13.5 Cooling efficiency on a 95°F day
      Very good · beats 74%
      Heat at 5°F
      21,600 BTU/h98% of its 47°F output
      Below average · beats 22%

      A good fit if…

      • Your winters get properly cold - it is ENERGY STAR cold-climate certified, with 21,600 BTU/h at 5°F.
      • You want steady temperatures and quiet running - the compressor varies its speed.

      Think twice if…

      • Cooling cost matters most - its SEER2 is below average for mini-splits.
      • You want the newest refrigerant - it uses R-410A, which is being phased down.

      Calculate my running cost

      Details

      Specifications18,000 BTU, R-410A
      General
      BrandTrane / Mitsubishi Electric
      Also sold asAmerican Standard / Mitsubishi Electric
      Outdoor unit modelNTXMPH20A122C
      SeriesNV-Series
      TypeMini-split heat pump
      Nominal size18,000 BTU
      CompressorVariable-speed units run longer at low powerContinuously variable
      RefrigerantR-410A
      Connected (smart) capableNo
      On the market sinceAugust 1, 2022
      Last certifiedDecember 15, 2023
      Cooling
      SEER2Seasonal efficiency, higher is better17.0 (range 15.7-17.0)
      EER2Efficiency at 95°F outdoors12.3-13.5
      Cooling capacity18,000-19,000 BTU/h
      Heating
      HSPF2Seasonal efficiency, higher is better9.0-10.0
      Capacity at 47°F22,000 BTU/h
      Capacity at 17°F13,700 BTU/h
      Capacity at 5°F21,600 BTU/h
      COP at 5°F2.0 = twice as efficient as a space heater1.89
      ENERGY STAR cold climateYes
      Heating output as it gets colder98% kept at 5°F

      Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its best matchup at the standard test temperatures, in BTU/h:

      Certified matchups4 indoor units

      The same outdoor unit scores differently with each indoor unit. Ask your installer for the AHRI reference number of the exact system you are quoted.

      Indoor unitSEER2EER2HSPF2Heat @5°FAHRI ref.
      - · cold climate17.013.510.021,600212925513
      - American Standard / Mitsubishi Electric · cold climate17.013.510.021,600212925512
      -15.712.39.0-212925520
      - American Standard / Mitsubishi Electric15.712.39.0-212925517
      Yearly running cost in 10 large cities$525-$1,392

      At each state's average electricity price and the city's typical heating and cooling hours.

      Questions4
      What is the SEER2 rating of the Trane / Mitsubishi Electric NTXMPH20A122C?
      The Trane / Mitsubishi Electric NTXMPH20A122C is rated at up to 17.0 SEER2 and 13.5 EER2 for cooling and up to 10.0 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with; across its 4 certified matchups SEER2 ranges from 15.7-17.0.
      Is the Trane / Mitsubishi Electric NTXMPH20A122C good for cold climates?
      Yes. At least one certified matchup meets the ENERGY STAR cold-climate criteria, delivering up to 21,600 BTU/h at 5°F with a COP of 1.89, so it is still 1.9 times as efficient as electric resistance heat at that temperature.
      How much does the Trane / Mitsubishi Electric NTXMPH20A122C cost to run per year?
      At its rated efficiency it costs about $525-$1,392 a year in electricity in large U.S. cities, depending on climate and local rates - for example $646 in Phoenix and $1,162 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
      What refrigerant does the Trane / Mitsubishi Electric NTXMPH20A122C use?
      It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.

      Running cost and savings

      Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.

      Heat pump $640/yrYou save $389/yrSee details ↓
      1. Where you live
      Adjust heating and cooling hours

      Filled in from your city's climate. Change them if you run the system much more or less than usual.

      2. The heat pump Trane / Mitsubishi Electric NTXMPH20A122C
      3. What it replaces
      4. Price replace the example with your quote
      Heat pump, per year
      $640
      Current system, per year
      $1,029
      You save per year
      $389
      Payback
      18.0 years
      Net after 10 years
      -$3,110

      Cooling $393Heating $246Electricity used: 3,999 kWhSaved vs. a minimum-efficiency heat pump: $156

      Estimates use the unit's rated SEER2 and HSPF2, full-load hours derived from NOAA 1991-2020 degree days, average residential electricity prices from the U.S. EIA (12 months to July 2026) and fuel prices from EIA (2025 for natural gas, week of 2026-10-05 for propane and heating oil). Very cold days that need backup heat are not modelled. Federal minimum for comparison: 14.3 SEER2 / 7.5 HSPF2.

      Similar 18,000 BTU models

      See all 465 18,000 BTU mini-splits, ranked

      Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of December 15, 2023. How we use the data.