HVAC Rated

Cold winters · Mild summers

Best heat pumps for Bend, OR

Bend sees about 50 nights a year at or below 20°F. A cold-climate certified model keeps the house warm without leaning on backup heat.

A typical heat pump costs about $1,527 a year to heat a house here and $66 to cool it. A 95% gas furnace would cost $1,495 for the same heat.

Cheapest to run in Bend

Ranked by yearly electricity cost in this climate, so the balance of heating and cooling efficiency is the one that matters here. Cold-climate certified models only.

Running cost calculator for Bend

Pre-filled with Bend's climate and Oregon prices. Pick a model, tell it what you heat with today, and add your quote.

Heat pump $1,055/yrYou save $203/yrSee details ↓
1. Where you live
Adjust heating and cooling hours

Filled in from your city's climate. Change them if you run the system much more or less than usual.

2. The heat pump pick a model or type its ratings
3. What it replaces
4. Price replace the example with your quote
Heat pump, per year
$1,055
Current system, per year
$1,258
You save per year
$203
Payback
Over 30 years
Net after 10 years
-$6,972

Cooling $37Heating $1,018Electricity used: 6,773 kWhSaved vs. a minimum-efficiency heat pump: $218

Estimates use the unit's rated SEER2 and HSPF2, full-load hours derived from NOAA 1991-2020 degree days, average residential electricity prices from the U.S. EIA (12 months to July 2026) and fuel prices from EIA (2025 for natural gas, week of 2026-10-05 for propane and heating oil). Very cold days that need backup heat are not modelled. Federal minimum for comparison: 14.3 SEER2 / 7.5 HSPF2.

More for Bend

Top 5 12,000 BTU mini-splitsfrom $329/yr
Top 5 24,000 BTU mini-splitsfrom $659/yr
Top 5 3-ton central heat pumpsfrom $1,164/yr
ModelSEER2HSPF2Per year
TOSHIBA CARRIER MCY-MUB0368HS2P-UL29.712.2$1,164
LG KUSXA361A23.510.5$1,356
Trane 5TWV0X36A121.010.5$1,362
Lennox SL22KLV-036-230A20.510.5$1,363
Lennox EL21KLV-036-230A20.010.4$1,377

All 3-ton central heat pumps

Heat pump vs. gas, propane and oilgas is cheaper to run

Yearly cost to heat a typical house (36,000 BTU/h of heat, 2,450 full-load hours) at Oregon prices.

  • Natural gas furnace, 95% AFUE$1,495/yr
  • Heat pump (typical, 9.0 HSPF2)$1,527/yr
  • Natural gas furnace, 80% AFUE$1,775/yr
  • Propane furnace, 95% AFUE$2,713/yr
  • Electric baseboard or furnace$4,027/yr
  • Heating oil, 85% AFUE$4,476/yr

Electricity and natural gas: Oregon residential averages from the U.S. EIA; propane and heating oil: latest EIA weekly prices.

Month by monthpeak $247 in December

Heating and cooling degree days (NOAA 1991-2020 normals) and what a typical 3-ton heat pump costs in each month at 15.6¢/kWh.

MonthHeating DDCooling DDCost
January9380$232
February7940$196
March7350$182
April5870$145
May3657$92
June18333$52
July44136$39
August53110$36
September19230$54
October5091$126
November7760$192
December9980$247
What size heat pump for a Bend home?5 ton for 2,000 sq ft
  • 1,000 sq ft house2.5 ton · heating load 27,000 BTU/h
  • 1,500 sq ft house3.5 ton · heating load 40,500 BTU/h
  • 2,000 sq ft house5 ton · heating load 54,000 BTU/h
  • 2,500 sq ft house5+ ton · heating load 67,500 BTU/h

Average insulation, 8 ft ceilings. Size calculator for your own home

Questions4
Do heat pumps work in Bend winters?
Bend sees about 50 nights a year at or below 20°F. A cold-climate certified model keeps the house warm without leaning on backup heat. The average winter low is 25°F, and the heating season adds up to 6,172 heating degree days (NOAA 1991-2020 normals).
How much does it cost to run a heat pump in Bend?
A typical 3-ton central heat pump (17.0 SEER2, 9.0 HSPF2) uses about $1,527 of electricity a year for heating and $66 for cooling in Bend, at the Oregon average of 15.6¢/kWh. The most efficient models cost less - see the rankings above.
Is a heat pump cheaper than a gas furnace in Bend?
Not on heating alone at today's prices: about $1,527 a year with a typical heat pump versus $1,495 with a 95% gas furnace (Oregon averages: 15.6¢/kWh, $1.61/therm). A high-HSPF2 model narrows the gap, and a heat pump also replaces the air conditioner. Against propane, oil or electric heat it is usually far cheaper.
What size heat pump do I need for a 2,000 sq ft house in Bend?
With average insulation, roughly a 5-ton system: the estimated cooling load is 27,600 BTU/h and the heating load 54,000 BTU/h. Use the size calculator for your own house, and ask installers for a Manual J calculation.

Nearby cities

Climate: NOAA 1991-2020 normals, station REDMOND ROBERTS FLD (26 km away).