HVAC Rated

Mild winters · Hot summers

Best heat pumps for San Angelo, TX

Winters in San Angelo are mild, so heating efficiency matters less than cooling.

A typical heat pump costs about $544 a year to heat a house here and $661 to cool it. A 95% gas furnace would cost $602 for the same heat, so the heat pump is cheaper to run.

Cheapest to run in San Angelo

Ranked by yearly electricity cost in this climate, so the balance of heating and cooling efficiency is the one that matters here.

Running cost calculator for San Angelo

Pre-filled with San Angelo's climate and Texas prices. Pick a model, tell it what you heat with today, and add your quote.

Heat pump $737/yrYou save $489/yrSee details ↓
1. Where you live
Adjust heating and cooling hours

Filled in from your city's climate. Change them if you run the system much more or less than usual.

2. The heat pump pick a model or type its ratings
3. What it replaces
4. Price replace the example with your quote
Heat pump, per year
$737
Current system, per year
$1,226
You save per year
$489
Payback
18.4 years
Net after 10 years
-$4,114

Cooling $374Heating $363Electricity used: 4,607 kWhSaved vs. a minimum-efficiency heat pump: $222

Estimates use the unit's rated SEER2 and HSPF2, full-load hours derived from NOAA 1991-2020 degree days, average residential electricity prices from the U.S. EIA (12 months to July 2026) and fuel prices from EIA (2025 for natural gas, week of 2026-10-05 for propane and heating oil). Very cold days that need backup heat are not modelled. Federal minimum for comparison: 14.3 SEER2 / 7.5 HSPF2.

More for San Angelo

Top 5 12,000 BTU mini-splitsfrom $238/yr
Top 5 24,000 BTU mini-splitsfrom $497/yr
Top 5 3-ton central heat pumpsfrom $779/yr
ModelSEER2HSPF2Per year
TOSHIBA CARRIER MCY-MUB0368HS2P-UL29.712.2$779
LG KUSXA361A23.510.5$944
LG KUSXB361A22.010.3$986
Trane 5TWV0X36A121.010.5$1,001
Lennox SL22KLV-036-230A20.510.5$1,014

All 3-ton central heat pumps

Heat pump vs. gas, propane and oilheat pump is cheaper than gas

Yearly cost to heat a typical house (36,000 BTU/h of heat, 850 full-load hours) at Texas prices.

  • Heat pump (typical, 9.0 HSPF2)$544/yr
  • Natural gas furnace, 95% AFUE$602/yr
  • Natural gas furnace, 80% AFUE$715/yr
  • Propane furnace, 95% AFUE$1,092/yr
  • Electric baseboard or furnace$1,435/yr
  • Heating oil, 85% AFUE$1,553/yr

Electricity and natural gas: Texas residential averages from the U.S. EIA; propane and heating oil: latest EIA weekly prices.

Month by monthpeak $146 in July

Heating and cooling degree days (NOAA 1991-2020 normals) and what a typical 3-ton heat pump costs in each month at 16.0¢/kWh.

MonthHeating DDCooling DDCost
January5471$140
February3868$100
March22247$68
April75138$52
May10336$82
June0516$122
July0615$146
August0594$141
September6366$88
October76142$53
November29421$80
December5152$132
What size heat pump for a San Angelo home?3 ton for 2,000 sq ft
  • 1,000 sq ft house2 ton · heating load 15,000 BTU/h
  • 1,500 sq ft house2.5 ton · heating load 22,500 BTU/h
  • 2,000 sq ft house3 ton · heating load 30,000 BTU/h
  • 2,500 sq ft house3 ton · heating load 37,500 BTU/h

Average insulation, 8 ft ceilings. Size calculator for your own home

Questions4
Do heat pumps work in San Angelo winters?
Winters in San Angelo are mild, so heating efficiency matters less than cooling. The average winter low is 35°F, and the heating season adds up to 2,130 heating degree days (NOAA 1991-2020 normals).
How much does it cost to run a heat pump in San Angelo?
A typical 3-ton central heat pump (17.0 SEER2, 9.0 HSPF2) uses about $544 of electricity a year for heating and $661 for cooling in San Angelo, at the Texas average of 16.0¢/kWh. The most efficient models cost less - see the rankings above.
Is a heat pump cheaper than a gas furnace in San Angelo?
Yes, for heating at today's prices: about $544 a year with a typical heat pump versus $602 with a 95% gas furnace, using Texas averages of 16.0¢/kWh and $1.87/therm.
What size heat pump do I need for a 2,000 sq ft house in San Angelo?
With average insulation, roughly a 3-ton system: the estimated cooling load is 32,100 BTU/h and the heating load 30,000 BTU/h. Use the size calculator for your own house, and ask installers for a Manual J calculation.

Nearby cities

Climate: NOAA 1991-2020 normals, station SAN ANGELO (9 km away).