9,000 BTU mini-split heat pump · M-Series
Mitsubishi Electric MUZ-WR09NA
Below average cooling and heating efficiency for a 9,000 BTU mini-split heat pump, but not rated for cold climates.
Ranks #390 of 395 9,000 BTU mini-splits for cooling efficiency, and costs about $311 a year to run in a mixed climate like Atlanta.
- SEER2
- 18.0 Cooling efficiency over a seasonBelow average · beats 4%
- HSPF2
- 8.5 Heating efficiency over a seasonBelow average · beats 2%
- EER2
- 11.0 Cooling efficiency on a 95°F dayBelow average · beats 9%
- Heat at 5°F
- - Not reported by the maker
A good fit if…
- You want steady temperatures and quiet running - the compressor varies its speed.
Think twice if…
- You often see nights below 0°F - it is not cold-climate certified.
- Cooling cost matters most - its SEER2 is below average for mini-splits.
- You mainly need heat - its HSPF2 is below average for mini-splits.
- You want the newest refrigerant - it uses R-410A, which is being phased down.
Details
Specifications
| General | |
|---|---|
| Brand | Mitsubishi Electric |
| Also sold as | Trane / Mitsubishi Electric, American Standard / Mitsubishi Electric |
| Outdoor unit model | MUZ-WR09NA |
| Series | M-Series |
| Type | Mini-split heat pump |
| Nominal size | 9,000 BTU |
| CompressorVariable-speed units run longer at low power | Continuously variable |
| Refrigerant | R-410A |
| Connected (smart) capable | No |
| On the market since | January 1, 2025 |
| Last certified | July 3, 2025 |
| Cooling | |
| SEER2Seasonal efficiency, higher is better | 18.0 (range 18.0) |
| EER2Efficiency at 95°F outdoors | 11.0 |
| Cooling capacity | 9,000 BTU/h |
| Heating | |
| HSPF2Seasonal efficiency, higher is better | 8.5 |
| Capacity at 47°F | 10,900 BTU/h |
| Capacity at 17°F | 10,900 BTU/h |
| Capacity at 5°F | - |
| COP at 5°F2.0 = twice as efficient as a space heater | - |
| ENERGY STAR cold climate | No |
Heating output as it gets colder
Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its matchup with MSZ-WR09NA at the standard test temperatures, in BTU/h:
Certified matchups
The same outdoor unit scores differently with each indoor unit. Ask your installer for the AHRI reference number of the exact system you are quoted.
| Indoor unit | SEER2 | EER2 | HSPF2 | Heat @5°F | AHRI ref. |
|---|---|---|---|---|---|
| MSZ-WR09NA | 18.0 | 11.0 | 8.5 | - | 209832212 |
| NTXWEL09A112A Trane / Mitsubishi Electric | 18.0 | 11.0 | 8.5 | - | 209832230 |
| NAXWEL09A112A American Standard / Mitsubishi Electric | 18.0 | 11.0 | 8.5 | - | 209832197 |
Yearly running cost in 10 large cities
- Phoenix, AZ$312/yr
- Miami, FL$237/yr
- Houston, TX$280/yr
- Atlanta, GA$311/yr
- Los Angeles, CA$308/yr
- New York, NY$775/yr
- Chicago, IL$636/yr
- Denver, CO$534/yr
- Seattle, WA$332/yr
- Minneapolis, MN$663/yr
At each state's average electricity price and the city's typical heating and cooling hours.
Questions
- What is the SEER2 rating of the Mitsubishi Electric MUZ-WR09NA?
- The Mitsubishi Electric MUZ-WR09NA is rated at up to 18.0 SEER2 and 11.0 EER2 for cooling and up to 8.5 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with.
- Is the Mitsubishi Electric MUZ-WR09NA good for cold climates?
- It is not cold-climate certified: none of its matchups meet the ENERGY STAR cold-climate criteria (a COP of at least 1.75 at 5°F among other limits). In places with frequent sub-zero nights, pick a cold-climate 9,000 BTU model.
- How much does the Mitsubishi Electric MUZ-WR09NA cost to run per year?
- At its rated efficiency it costs about $237-$775 a year in electricity in large U.S. cities, depending on climate and local rates - for example $312 in Phoenix and $663 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
- Which indoor units work with the Mitsubishi Electric MUZ-WR09NA?
- ENERGY STAR lists 3 certified combinations for this outdoor unit. The highest-rated ones use MSZ-WR09NA, Trane / Mitsubishi Electric NTXWEL09A112A, American Standard / Mitsubishi Electric NAXWEL09A112A.
- What refrigerant does the Mitsubishi Electric MUZ-WR09NA use?
- It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.
Running cost and savings
Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.
Similar 9,000 BTU models
- LG KUSAE091A18.0 SEER2 · 8.7 HSPF2
- Trane / Mitsubishi Electric NTXSEL09A112A18.0 SEER2 · 8.5 HSPF2
- Hotpoint 1H09HN2DA · cold climate18.0 SEER2 · 9.5 HSPF2
- Trane / Mitsubishi Electric NTXSEL09A112AA18.0 SEER2 · 8.5 HSPF2
- WeatherMaker 38MVRAQ09AA3 · cold climate18.5 SEER2 · 8.8 HSPF2
- LG KUSAF091F18.0 SEER2 · 8.0 HSPF2
- MDV MOX130-09HFN1-MP0W · cold climate18.5 SEER2 · 8.8 HSPF2
- Comfort-Aire A-SVH09SB-1 · cold climate18.5 SEER2 · 8.8 HSPF2
See all 395 9,000 BTU mini-splits, ranked
Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of July 3, 2025. How we use the data.