HVAC Rated
    Menu

      3-ton central heat pump · 2-STAGE 17 SEER HP

      WeatherMaker PH7TAN436**AA

      Below average cooling and heating efficiency for a 3-ton central heat pump, but not rated for cold climates.

      Ranks #261 of 302 3 ton central heat pumps for cooling efficiency, and costs about $1,211 a year to run in a mixed climate like Atlanta.

      SEER2
      16.0 Cooling efficiency over a season
      Below average · beats 26%
      HSPF2
      7.8 Heating efficiency over a season
      Below average · beats 5%
      EER2
      11.7 Cooling efficiency on a 95°F day
      Average · beats 43%
      Heat at 5°F
      - Not reported by the maker

      A good fit if…

      • You want a certified 3-ton central heat pump at a typical efficiency level.

      Think twice if…

      • You often see nights below 0°F - it is not cold-climate certified.
      • Cooling cost matters most - its SEER2 is below average for central heat pumps.
      • You mainly need heat - its HSPF2 is below average for central heat pumps.
      • You want the newest refrigerant - it uses R-410A, which is being phased down.

      Calculate my running cost

      Details

      Specifications3 ton, R-410A
      General
      BrandWeatherMaker
      Also sold asBryant
      Outdoor unit modelPH7TAN436**AA
      Series2-STAGE 17 SEER HP
      TypeCentral heat pump
      Nominal size3 ton
      CompressorVariable-speed units run longer at low powerTwo-stage
      RefrigerantR-410A
      Connected (smart) capableNo
      On the market sinceMay 1, 2022
      Last certifiedDecember 12, 2023
      Cooling
      SEER2Seasonal efficiency, higher is better16.0 (range 15.5-16.0)
      EER2Efficiency at 95°F outdoors11.7
      Cooling capacity33,800-36,600 BTU/h
      Heating
      HSPF2Seasonal efficiency, higher is better7.8
      Capacity at 47°F35,000-36,000 BTU/h
      Capacity at 17°F21,600-22,200 BTU/h
      Capacity at 5°F-
      COP at 5°F2.0 = twice as efficient as a space heater-
      ENERGY STAR cold climateNo
      Heating output as it gets colder

      Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its matchup with EVM4X49M21A at the standard test temperatures, in BTU/h:

      Certified matchups4 indoor units

      The same outdoor unit scores differently with each indoor unit and furnace. Ask your installer for the AHRI reference number of the exact system you are quoted.

      Indoor unitFurnaceSEER2EER2HSPF2Heat @5°FAHRI ref.
      EVM4X49M21APG80VTLA48090B**16.011.77.8-213644284
      EVM4X49M21APG80VTLB60090C**16.011.77.8-213644294
      EVM4X49M21APG96VTAB60080C**16.011.77.8-213644516
      CAP**3717AL82*TB36045V1415.511.77.8-213172517
      Yearly running cost in 10 large cities$1,070-$2,904

      At each state's average electricity price and the city's typical heating and cooling hours.

      Questions5
      What is the SEER2 rating of the WeatherMaker PH7TAN436**AA?
      The WeatherMaker PH7TAN436**AA is rated at up to 16.0 SEER2 and 11.7 EER2 for cooling and up to 7.8 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with; across its 4 certified matchups SEER2 ranges from 15.5-16.0.
      Is the WeatherMaker PH7TAN436**AA good for cold climates?
      It is not cold-climate certified: none of its matchups meet the ENERGY STAR cold-climate criteria (a COP of at least 1.75 at 5°F among other limits). In places with frequent sub-zero nights, pick a cold-climate 3-ton model.
      How much does the WeatherMaker PH7TAN436**AA cost to run per year?
      At its rated efficiency it costs about $1,070-$2,904 a year in electricity in large U.S. cities, depending on climate and local rates - for example $1,325 in Phoenix and $2,431 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
      Which indoor units work with the WeatherMaker PH7TAN436**AA?
      ENERGY STAR lists 4 certified combinations for this outdoor unit. The highest-rated ones use EVM4X49M21A, CAP**3717AL.
      What refrigerant does the WeatherMaker PH7TAN436**AA use?
      It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.

      Running cost and savings

      Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.

      Heat pump $1,318/yrYou save $553/yrSee details ↓
      1. Where you live
      Adjust heating and cooling hours

      Filled in from your city's climate. Change them if you run the system much more or less than usual.

      2. The heat pump WeatherMaker PH7TAN436**AA
      3. What it replaces
      4. Price replace the example with your quote
      Heat pump, per year
      $1,318
      Current system, per year
      $1,870
      You save per year
      $553
      Payback
      24.4 years
      Net after 10 years
      -$7,974

      Cooling $801Heating $517Electricity used: 8,236 kWhSaved vs. a minimum-efficiency heat pump: $116

      Estimates use the unit's rated SEER2 and HSPF2, full-load hours derived from NOAA 1991-2020 degree days, average residential electricity prices from the U.S. EIA (12 months to July 2026) and fuel prices from EIA (2025 for natural gas, week of 2026-10-05 for propane and heating oil). Very cold days that need backup heat are not modelled. Federal minimum for comparison: 14.3 SEER2 / 7.5 HSPF2.

      Similar 3 ton models

      See all 302 3 ton central heat pumps, ranked

      Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of December 12, 2023. How we use the data.