1.5-ton central heat pump · MHP17L Series
MRCOOL MHP17L18P-**A
Below average cooling and heating efficiency for a 1.5-ton central heat pump, but not rated for cold climates.
Ranks #97 of 170 1.5 ton central heat pumps for cooling efficiency, and costs about $570 a year to run in a mixed climate like Atlanta.
- SEER2
- 16.4 Cooling efficiency over a seasonBelow average · beats 38%
- HSPF2
- 8.4 Heating efficiency over a seasonBelow average · beats 31%
- EER2
- 13.5 Cooling efficiency on a 95°F dayExcellent · beats 95%
- Heat at 5°F
- 9,300 BTU/h48% of its 47°F outputAverage · beats 58%
A good fit if…
- You want a certified 1.5-ton central heat pump at a typical efficiency level.
Think twice if…
- You often see nights below 0°F - it is not cold-climate certified.
- Cooling cost matters most - its SEER2 is below average for central heat pumps.
- You mainly need heat - its HSPF2 is below average for central heat pumps.
- You want the newest refrigerant - it uses R-410A, which is being phased down.
Details
Specifications
| General | |
|---|---|
| Brand | MRCOOL |
| Outdoor unit model | MHP17L18P-**A |
| Series | MHP17L Series |
| Type | Central heat pump |
| Nominal size | 1.5 ton |
| CompressorVariable-speed units run longer at low power | Single stage |
| Refrigerant | R-410A |
| Connected (smart) capable | No |
| On the market since | August 25, 2023 |
| Last certified | October 27, 2025 |
| Cooling | |
| SEER2Seasonal efficiency, higher is better | 16.4 (range 16.0-16.4) |
| EER2Efficiency at 95°F outdoors | 13.5 |
| Cooling capacity | 18,000 BTU/h |
| Heating | |
| HSPF2Seasonal efficiency, higher is better | 8.3-8.4 |
| Capacity at 47°F | 18,000 BTU/h |
| Capacity at 17°F | 11,400-11,800 BTU/h |
| Capacity at 5°F | 8,700-9,300 BTU/h |
| COP at 5°F2.0 = twice as efficient as a space heater | 2.06-2.10 |
| ENERGY STAR cold climate | No |
Heating output as it gets colder
Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its matchup with MCDP3036BNPB+TDR at the standard test temperatures, in BTU/h:
Certified matchups
The same outdoor unit scores differently with each indoor unit and furnace. Ask your installer for the AHRI reference number of the exact system you are quoted.
| Indoor unit | Furnace | SEER2 | EER2 | HSPF2 | Heat @5°F | AHRI ref. |
|---|---|---|---|---|---|---|
| MCDP3036BNPB+TDR | MGD96SE045B3XA | 16.4 | 13.5 | 8.3 | 8,700 | 213265530 |
| MCDP3036BNPB+TDR | MGD96SE070B4XA | 16.2 | 13.5 | 8.4 | 9,000 | 213265531 |
| MCDP3036CNPB+TDR | MGD96SE090C4XA | 16.0 | 13.5 | 8.4 | 9,300 | 213265532 |
| MCDP3036BNPB+TDR | MGD80SE070B3A | 16.0 | 13.5 | 8.3 | 8,700 | 213265529 |
Yearly running cost in 10 large cities
- Phoenix, AZ$633/yr
- Miami, FL$515/yr
- Houston, TX$567/yr
- Atlanta, GA$570/yr
- Los Angeles, CA$554/yr
- New York, NY$1,358/yr
- Chicago, IL$1,102/yr
- Denver, CO$916/yr
- Seattle, WA$562/yr
- Minneapolis, MN$1,133/yr
At each state's average electricity price and the city's typical heating and cooling hours.
Questions
- What is the SEER2 rating of the MRCOOL MHP17L18P-**A?
- The MRCOOL MHP17L18P-**A is rated at up to 16.4 SEER2 and 13.5 EER2 for cooling and up to 8.4 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with; across its 4 certified matchups SEER2 ranges from 16.0-16.4.
- Is the MRCOOL MHP17L18P-**A good for cold climates?
- It is not cold-climate certified: none of its matchups meet the ENERGY STAR cold-climate criteria (a COP of at least 1.75 at 5°F among other limits). In places with frequent sub-zero nights, pick a cold-climate 1.5-ton model.
- How much does the MRCOOL MHP17L18P-**A cost to run per year?
- At its rated efficiency it costs about $515-$1,358 a year in electricity in large U.S. cities, depending on climate and local rates - for example $633 in Phoenix and $1,133 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
- Which indoor units work with the MRCOOL MHP17L18P-**A?
- ENERGY STAR lists 4 certified combinations for this outdoor unit. The highest-rated ones use MCDP3036BNPB+TDR, MCDP3036CNPB+TDR.
- What refrigerant does the MRCOOL MHP17L18P-**A use?
- It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.
Running cost and savings
Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.
Similar 1.5 ton models
- Lennox ML14KP1-018-230A16.5 SEER2 · 7.8 HSPF2
- Lennox EL16KP1-018-230A16.5 SEER2 · 7.8 HSPF2
- MDV MOD30-20HFN1-MW · cold climate16.3 SEER2 · 10.2 HSPF2
- GE NS16H18SA5-**A16.5 SEER2 · 7.8 HSPF2
- Bryant 37MURAQ18AA3+KSAIC070123016.2 SEER2 · 8.5 HSPF2
- Concord 7HP14F18P-**A16.5 SEER2 · 7.8 HSPF2
- MDV MOD30-24HFN1-MT0W16.2 SEER2 · 8.5 HSPF2
- Comfort-Aire HSA1418S1-**A16.5 SEER2 · 7.8 HSPF2
See all 170 1.5 ton central heat pumps, ranked
Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of October 27, 2025. How we use the data.